SIC :- 3826 ; NAICS:-334516 ; ISIC:2651
Establishments primarily engaged in manufacturing instrumentation systems for chemical or physical analysis of the composition or concentration of samples of solid, fluid, gaseous, or composite material.
PRINTING SPECIFICATIONS:-
Print method
Impact dot matrix printer (8 print solenoids
Printing speed
1 line printing
2.7 lines/sec±20% (typical)
5 × 7 font + 3-dot line spacing
Motor terminal voltage at 4.8 VDC constant, 25×C(77×F),
continuous printing
1 dot line
21.6 dot lines/sec ± 20% (typical)
Motor terminal voltage at 4.8 VDC constant, 25×C(77×F),
continuous printin
Inking
Ribbon cassette (ERC-22 or ERC-09)
Total number of dots
Maximum 144 dots/dot line
Number of columns
Maximum 24 (5 × 7 font and 1 dot column space)
Character size
Dot pitch
Horizontal: 0.33 mm; Vertical: 0.37 mm (0.013”; 0.015”)
5 × 7 font
1.7 mm (W) × 2.6 mm (H); (0.067”×0.102”)
Coping capability
1 original + 1 copy
Paper feeding pitch
When feeding automatically
1-dot line pitch (0.37 mm / 0.015”)
During fast feeding
3-dot line pitch (1.11 mm / 0.044”)
Fast paper feeding speed
6.5 lines/sec
Motor terminal voltage at 4.8 VDC constant, 25×C(77×F),
continuous printing
Paper
1-ply paper roll Type : Normal paper Size : 57.5 ± 0.5 mm (paper width) × 83 mm or less (outside diameter) × 10 mm or more (inside diameter) Thickness : 0.06 to 0.085 mm Weight : 52.3 to 64 g/m2 (13.9 to 17.0 lbs) (45 to 55 Kg (20.41 to 24.94 lbs) / 1000 sheets / 1091×788mm
(42.95”×31.02”))
2-ply pressure-sensitive paper Type : No-carbon paper (Mitsubishi Seishi) N40 : Upper sheet (Hi) + Lower sheet (Blue color printing) Size : Form for cut sheet type 57.5 ± 0.5 mm (paper width) × 300 mm or less (paper length)
Form for paper roll type 57.5 ± 0.5 mm (paper width) × 83 mm or less (outside diameter), 10 mm or more (inside
diameter) Thickness : Upper sheet : 0.066 mm Lower sheet : 0.058 mm Weight : Upper sheet:47.0 g/m2 Lower sheet : 47.0 g/m2
Power Supply Voltage
Printer Driving Voltage
5.0 +0.8/-0.5 VDC (Ni-Cd battery, nominal voltage 4.8V)
5.0 ±0.5 VDC (when stabilized power supply is used)
Notes:
Can be applied to motor, print solenoid, and fast paper feed trigger solenoid
Use the same power supply.
In all printing pattern used, even during sending of current to
print solenoids, the voltage drop by the power supply voltage
and from wiring resistance must be 0.8 V or less. Also, voltage
loss in the driver circuitry (driver saturation voltage) must be 0.4
V or less.
Detector Input Voltage
5.0 +0.8/-1.7 VDC
Notes:
Can be applied to reset detector, timing detector.
Can be used with the same printer driver power supply
Reliability
MCBF : 1,500,000 lines Printer life : 2,250,000 lines
Environmental conditions for operating
Operating ambient temperature a) When using the ERC-22
-10× to 50× (14× to 122×F)
(The assured temperature for printing is 0× to 50×C (32× to 122×F))
b) When using the ERC-09
0× to 50×C (32× to 122×F)
Operating ambient humidity
10 to 90%RH (non-condensing)
Connection
Printer side
PCB fixed to the frame (with 2.5 mm (0.098") pitch copper pattern)
Circuit side
Flat cables or lead wires
Overall dimensions
91 mm (W) × 46.9 mm (D) ×15.8 mm (H)
3.58” (W) × 1.85” (D) × 0.62” (H)
Weight
Approximately 100 g (approximately 0.23 lb) except ribbon
cassette
Factory options
Manual feed knob
Horizontal type
Outside diameter: 20 mm (0.79”)
Ribbon cassette ERC-22 : Size : 90.9 mm (W) × 24.9 mm (D) × 6.3 mm (H) (3.58" × 0.98" × 0.25") Color : Purple or Black Life : Purple - Approx. 1 million characters Black - Approx. 600,000 characters ERC-09 : Size : 90.9 mm (W) × 26.4 mm (D) × 7.0 mm (H) (3.58" × 1.04" × 0.28") Color : Purple or Black Life : Purple - Approx. 250,000 characters Black - Approx. 200,000 characters Note : Power supply voltage: 5.0 VDC, 25×C (77×F), continuous printing
Model No. : Epson M190-G
Impact Dot Matrix Printer Mechanism
2" Impact Dot Printer Mechanism
Target Audience Profile:
SIC :- 3826 ; NAICS:-334516 ; ISIC:2651
Establishments primarily engaged in manufacturing instrumentation systems for chemical or physical analysis of the composition or concentration of samples of solid, fluid, gaseous, or composite material.
PRINTING SPECIFICATIONS:-
2.7 lines/sec±20% (typical)
5 × 7 font + 3-dot line spacing
Motor terminal voltage at 4.8 VDC constant, 25×C(77×F),
continuous printing
1 dot line
21.6 dot lines/sec ± 20% (typical)
Motor terminal voltage at 4.8 VDC constant, 25×C(77×F),
continuous printin
Horizontal: 0.33 mm; Vertical: 0.37 mm (0.013”; 0.015”)
5 × 7 font
1.7 mm (W) × 2.6 mm (H); (0.067”×0.102”)
When feeding automatically
1-dot line pitch (0.37 mm / 0.015”)
During fast feeding
3-dot line pitch (1.11 mm / 0.044”)
Motor terminal voltage at 4.8 VDC constant, 25×C(77×F),
continuous printing
1-ply paper roll
Type : Normal paper
Size : 57.5 ± 0.5 mm (paper width) × 83 mm or less (outside diameter) × 10 mm or more (inside diameter)
Thickness : 0.06 to 0.085 mm
Weight : 52.3 to 64 g/m2 (13.9 to 17.0 lbs) (45 to 55 Kg (20.41 to 24.94 lbs) / 1000 sheets / 1091×788mm
(42.95”×31.02”))
2-ply pressure-sensitive paper
Type : No-carbon paper (Mitsubishi Seishi)
N40 : Upper sheet (Hi) + Lower sheet (Blue color printing)
Size : Form for cut sheet type 57.5 ± 0.5 mm (paper width) × 300 mm or less (paper length)
Form for paper roll type 57.5 ± 0.5 mm (paper width) × 83 mm or less (outside diameter), 10 mm or more (inside
diameter)
Thickness : Upper sheet : 0.066 mm
Lower sheet : 0.058 mm
Weight : Upper sheet:47.0 g/m2
Lower sheet : 47.0 g/m2
Printer Driving Voltage
5.0 +0.8/-0.5 VDC (Ni-Cd battery, nominal voltage 4.8V)
5.0 ±0.5 VDC (when stabilized power supply is used)
Notes:
Can be applied to motor, print solenoid, and fast paper feed trigger solenoid
Use the same power supply.
In all printing pattern used, even during sending of current to
print solenoids, the voltage drop by the power supply voltage
and from wiring resistance must be 0.8 V or less. Also, voltage
loss in the driver circuitry (driver saturation voltage) must be 0.4
V or less.
Detector Input Voltage
5.0 +0.8/-1.7 VDC
Notes:
Can be applied to reset detector, timing detector.
Can be used with the same printer driver power supply
Printer life : 2,250,000 lines
Operating ambient temperature
a) When using the ERC-22
-10× to 50× (14× to 122×F)
(The assured temperature for printing is 0× to 50×C (32× to 122×F))
b) When using the ERC-09
0× to 50×C (32× to 122×F)
Operating ambient humidity
10 to 90%RH (non-condensing)
Printer side
PCB fixed to the frame (with 2.5 mm (0.098") pitch copper pattern)
Circuit side
Flat cables or lead wires
3.58” (W) × 1.85” (D) × 0.62” (H)
cassette
Manual feed knob
Horizontal type
Outside diameter: 20 mm (0.79”)
Ribbon cassette
ERC-22 :
Size : 90.9 mm (W) × 24.9 mm (D) × 6.3 mm (H) (3.58" × 0.98" × 0.25")
Color : Purple or Black
Life : Purple - Approx. 1 million characters Black - Approx. 600,000 characters
ERC-09 :
Size : 90.9 mm (W) × 26.4 mm (D) × 7.0 mm (H) (3.58" × 1.04" × 0.28")
Color : Purple or Black
Life : Purple - Approx. 250,000 characters Black - Approx. 200,000 characters
Note : Power supply voltage: 5.0 VDC, 25×C (77×F), continuous printing
Sample Order FAQ :